Accessibility Information

Users of assistive technologies such as screen readers should use the following link to activate Accessibility Mode before continuing: Learn more and Activate accessibility mode.

Folding Snow Plows, Pusher Plows, and other miscellaneous parts for Wheel Loader

Solicitation Number: FA5205-11-Q-MY02
Agency: Department of the Air Force
Office: Pacific Air Forces
Location: 35 CONS - Misawa
  • Print

Note:

There have been modifications to this notice. To view the most recent modification/amendment, click here
:
FA5205-11-Q-MY02
:
Award
:
Added: May 15, 2011 7:18 pm Modified: May 18, 2011 1:58 amTrack Changes
Description:
Provide Folding Snow Plows, Pusher Plows, and other miscellaneous parts and to be delivered to Bldg. 910, Misawa Air Base, Japan, no later than the end of September 2011. These items are used in snow removal by the wheel loader.
If offeror proposing "or-equal" item shall submit catalog data indicating the specification.

Items:


0001. 2 Folding Snow Plows for Wheel Loader of NEW HOLLAND W190B and CATAPILLAR 924H: The plow shall be multi-angle plow with ability to fold into different configurations, such as one side removal, two side removal, and center scooping, and attached to specified wheel loaders shown above.
Size: 48"H x 124" (angle) thru 144"W (flat)
Weight: 3750lbs
Quantity: 2 EA
Manufacturer: HENKE Manufacturing
Model No: FV 12 model or equal


0002. Pusher Plows for Wheel Loader, NEW HOLLAND W190B and CATAPILLAR 924H: The plow shall be able to two runners adjust, height adjust, bolt-on end-gate remove, and attached to specified wheel loader shown above.
Size: 12ft length, 42" moldboard
Quantity: 1 EA
Manufacturer: HENKE Manufacturing or equal
Model No: Quick Pusher Plow, QP-42, 12ft-with Quick Push Socket or equal


0003. Pusher Plows for Wheel Loader, NEW HOLLAND W190B and CATAPILLAR 924H. The Plow shall be able to adjust two runners, height
Size: 10ft length, 42" moldboard
Quantity: 1 EA
Manufacturer: HENKE Manufacturing
Model No: Quick Pusher Plow, QP-42, 10ft-with Quick Push Socket or equal


0004. Cutting Edge Left Hand for Item No. 0001
Steel, Trimmed
Size: 3/4" x 6" x 72"
Quantity: 20 EA
Manufacturer: HENKE
Model No.: Folding Vee Cutting Edge or equal
Part No.: 2300-00483


0005. Cutting Edge Right Hand for Item No. 0001
Steel, Trimmed
Size: 3/4" x 6" x 72"
Quantity: 20 EA
Manufacturer: HENKE
Model No.: Folding Vee Cutting Edge or equal
Part No.: 2300-00463


0006. Nut and Bolt for Item No. 0004 and No. 0005
Size: 5/8 - 11 Grade. C.
Quantity: 100 EA
Manufacturer: HENKE
Model No. : Toplock nut or equal
Part No.: 7030084


0007. Nut and Bolt for Item No. 0004 and No. 0005
Size: 5/8 - 11 x 2.5 Grade. 8.
Quantity: 100 EA
Manufacturer: HENKE
Model No.: Plow Bolt or equal
Part No.: 7150003


0008. Cutting Edge for Item No. 0002
Size: 6'
Quantity: 10 EA
Manufacturer: HENKE
Model No.: Quick Pusher Plow Cutting Edge 6ft or equal
Part No.:715004


0009. Cutting Edge for Item No. 0003
Size: 5'
Quantity: 10 EA
Manufacturer: HENKE
Model No.: Quick Pusher Plow Cutting Edge 5ft or equal
Part No.: 7250026


0010. Nut and Bolt for Item No. 0008 and 0009
Size; 5/8 - 11 x 4.00
Quantity: 100EA
Manufacturer: HENKE
Model No.: Hex Bolts (Rubber and poly cutting edges) or equal
Part No.: 7020064


0011. Lock Nut for Item No. 0004, 0005, 0008, and 0009
Size: 5/8 - 11, Grade. C
Quantity: 100 EA
Manufacturer: HENKE
Model No.: Toplock Nut or equal
Part No.: 7030084


0012. Runner for Item No. 0002 and 0003
Carbide Runner Assembly or Abrasion Resistant Runner
Quantity: 10 EA
Manufacturer: HENKE
Model No.: Quick Push Runner or equal
Part No.: 2800-A0191


0013. Bolt and Nut for Item No. 0012
Size: HEX, 3/4- 10 x 2.5, Grade. 8
Quantity: 20 EA
Manufacturer: HENKE
Model No.: Quick Push Runner Bolt and Nut, HEX Capscrew or equal
Part No.: 7020255


0014. Bolt and Nut for Item No. 0012
Size: HEX, 3/4 - 10, Grade. C
Quantity: 20 EA
Manufacturer: HENKE
Model No.: Quick Push Runner Bolt and Nut, Toplock Nut or equal
Part No.: 7030030


-End Item-

Added: May 18, 2011 10:32 pm
This is the request for quotation (RFQ).

Response Date for this RFQ has been set as Pacific Time Zone, however the offeror shall comply with Japan Standard Time (JST) which is, the closing date of 0830am, 31 May 2011 as stated in attached RFQ.
Added: May 30, 2011 10:20 pm
Amendment No. 0001 - Subject RFQ is amended for chnages below:
1.  RFQ closing date is extended from "31 May 11at 08:30." to "6 Jun 11 at 08:30.", Japan Standard Time.
2.  Pictures of exisiting hitches for each wheel loaders of New Holland W190B and Caterpillar 924H are attached.
Added: Jun 27, 2011 1:04 am
This is to notify that the subject delivery order (DO) was awarded to Earle Kinlaw Associates Inc. on 27 Jun 11 (JST).
Please consult the list of document viewers if you cannot open a file.

Solicitation 1

Type:
Solicitation
Posted Date:
May 18, 2011
RFQ_Plow.pdf (56.56 Kb)
Description: This is the request for quoatation for FA5205-11-Q-MY02, Folding Snow Plows, Pusher Plows, and other miscellaneous parts for Wheel Loader.

Amendment 1

Type:
Mod/Amendment
Posted Date:
May 30, 2011
Description: Amendment No. 0001 - Subject RFQ is amended for changes below:

1. RFQ closing date is extended from 31 May 11 at 08:30 a.m. to 6 Jun 11 at 08:30 a.m., Japan Standard Time.
2. Pictures of existing hitches for each wheel loaders of New Holland W190B and Caterpillar 924H are attached.

Amendment 2

Type:
Mod/Amendment
Posted Date:
May 30, 2011
Description: Attachment for Amendment No. 0001

Amendment 3

Type:
Mod/Amendment
Posted Date:
June 2, 2011
Description: Amendment No. 0002 - Subject RFQ is amended for changes below:

1. The Part No. of Item 0008, Cutting Edge for Item No. 0002 is changed from 715004 to 7150004.

2. The Part No. of Item 0009, Cutting Edge for Item No. 0003 is changed from 7250026 to 7150026.

3. Size of Item 0010, Nut and Bolt for Item No. 0008 and 0009 is changed from 5/8 11 x 4.00 to 5/8 11 x 2.5.

4. The Part No. of Item 0010, Nut and Bolt for Item No. 0008 and 0009 is changed from 7020064 to 7150003.
:
Unit 5201
Misawa AB, APO Japan, 96319-5201
:
Bldg. 910, Heavy Equipment Shop, 35th Civil Engineering Squadron, Misawa Air Base, Japan
Unit 5022, APO AP 96319-5022
Misawa, Non-U.S. 96319-5022
Japan
:
Masaya Misawa,
Buyer
Phone: 81176571972
Fax: 81176524793
:
Satoshi Nogawa,
Contracting Officer
Phone: 01181176643496
Fax: 01181176524793