Accessibility Information

Users of assistive technologies such as screen readers should use the following link to activate Accessibility Mode before continuing: Learn more and Activate accessibility mode.

Dockside Repairs for Coast Guard Cutter STURGEON BAY

Agency: Department of Homeland Security
Office: United States Coast Guard (USCG)
Location: USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2
  • Print
Added: Dec 13, 2013 3:28 pm
The U.S. Coast Guard Surface Forces Logistics Center, contracting and procurement IBCT product line intends to issue a solicitation requesting proposals for dockside repairs for the U.S. Coast Guard Cutter STURGEON BAY (WTGB 109) a 140' ice breaking tug. The Coast Guard intends to conduct this procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 15, Contracting by Negotiation.

This procurement will be issued as a HUBZone set aside. The NAICS code will be 336611 and the small business size standard will be less than 1000 employees.

The solicitation will be issued as a best value request for proposal (RFP) approximately 16 December 2013 with proposals due approximately 16 January 2013. Proposals will be evaluated using price and past performance as evaluation factors with past performance and price being considered of equal importance. The solicitation/RFP will be issued via the Federal Business Opportunity (FedBizOpps) website at A hard copy solicitation will not be issued. Contractors will need to monitor the FedBizOpps website for RFP/solicitation release and any subsequent amendments.

All required dock side repairs will be at the cutter's home pier in Bayonne, NJ.

The performance period is anticipated to be from 15 April 2014 - 21 May 2014.

The current draft list of items for this requirement is listed below:


001 Chain Lockers, Clean and Inspect
002 Main Diesel Engine (MDE) Exhaust Piping, Commercial Clean
003 Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean
004 Boiler Exhaust Piping, Commercial Clean
005 Circuit Breakers (60 Hz), Inspect and Test
006 Anchor Chain(s) and Ground Tackle, Inspect and Repair
007 Anchor Windlass, Level 2 Inspect and Repair
008 Vertical Capstan, Level 2 Inspect and Repair
009 Sewage and Grey water Piping, Clean and Flush
010 Fixed Ballast (Lead Ingots), Encapsulate
011 Deck Covering (Wet/Dry), Seal
012 Deck Covering (Electrical Matting), Renew
013 Watertight Doors and Scuttles (External), Renew
014 Window, Renew
015 Transmitter, Tank Level Indicator, Renew
016 Chain Locker, Preserve 100%
017 Chain Lockers, Preserve - Partial
00C Travel and Perdiem

The specification for this project is posted with this pre-solicitation synopsis for review from interested parties.

Drawings on CD-ROM will be free of charge to contractors upon request. The contact for drawings is Andrew Jacobs at 510-637-5974, or

Certifications: All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures.

For further information or questions regarding this potential solicitation, contact Andrew Jacobs at 510-637-5974, or

Added: Dec 16, 2013 7:38 pm
Proposals are due by 16 January 2014, 4:00 pm Pacific Time.
Please consult the list of document viewers if you cannot open a file.

Specification for Coast Guard Cutter STURGEON Repair

Other (Draft RFPs/RFIs, Responses to Questions, etc..)
Specification for Coast Guard Cutter STURGEON Repair
Posted Date:
December 13, 2013
Description: Specification for Coast Guard Cutter STURGEON Repair

Solicitation 1

Posted Date:
December 16, 2013
Description: Solicitation/RFP for Dockside Repair of Coast Guard Cutter STURGEON BAY
Description: Specification for Dockside Repair of Coast Guard Cutter STURGEON BAY
1301 Clay St.,
Suite 807N
Oakland, California 94612-5249
United States
85 Port Terminal Blvd, Slip 3
Bayonne, New Jersey 07002
United States
Andrew G. Jacobs
Phone: 5106375974